Shop
You are here: / / / GDS Clamp Stick expanding mandrel
GDS Clamp Stick expanding mandrel

GDS Clamp Stick expanding mandrel

GDS Clamp Stick SK50 expanding mandrel

The Clamp Stick is available with an SK50 taper as shown here or with a straight shaft of 20 or 32 mm in diameter

  • Enter a quantity for each mandrel in the corresponding box & leave the overall quantity at the bottom (next to the "Add to RFQ" button) set to "1."

  • A 20 mm ø shaft mandrel, 53 mm in length, that clamps a 13 mm ID
  • A 32 mm ø shaft mandrel, 53 mm in length, that clamps a 13 mm ID
  • A 20 mm ø shaft mandrel, 53 mm in length, that clamps a 16 mm ID
  • A 32 mm ø shaft mandrel, 53 mm in length, that clamps a 16 mm ID
  • A 20 mm ø shaft mandrel, 56 mm in length, that clamps a 22 mm ID
  • A 32 mm ø shaft mandrel, 56 mm in length, that clamps a 22 mm ID
  • A 20 mm ø shaft mandrel, 58 mm in length, that clamps a 27 mm ID
  • A 32 mm ø shaft mandrel, 58 mm in length, that clamps a 27 mm ID
  • A 20 mm ø shaft mandrel, 62 mm in length, that clamps a 32 mm ID
  • A 32 mm ø shaft mandrel, 62 mm in length, that clamps a 32 mm ID
  • A 20 mm ø shaft mandrel, 64 mm in length, that clamps a 40 mm ID
  • A 32 mm ø shaft mandrel, 64 mm in length, that clamps a 40 mm ID
  • A mandrel with an SK50 taper, 98 mm in length from the gauge point, that clamps a 16 mm ID
  • A mandrel with an SK50 taper, 101 mm in length from the gauge point, that clamps a 22 mm ID
  • A mandrel with an SK50 taper, 103 mm in length from the gauge point, that clamps a 27 mm ID
  • A mandrel with an SK50 taper, 105 mm in length from the gauge point, that clamps a 32 mm ID
  • A mandrel with an SK50 taper, 107 mm in length from the gauge point, that clamps a 40 mm ID
Category:

Related products

© Copyright - Toolroom Solutions Inc. All rights reserved.
GDS xGrind manual chuckGDS xGrind HPS manual tool grinding chuckGDS ALLIGATOR automatic hydraulic chuckGDS Alligator automatic hydraulic chuck